|
Antenna
|
Type
|
Description
|
Gain
|
|
|
Diversity Omni-directional
|
Ceiling-mount diversity indoor antenna with RP-TNC
connectors-This antenna was designed for WLAN applications for frequencies of
2400-2500 MHz. The antenna is omnidirectional and
has a nominal gain of 2.2dBi. Its low profile allows it to remain unnoticed
in the ceiling. It comes with a clip that permits it to be mounted to a
drop-ceiling cross member.
|
2dBi
|
|
|
Diversity Omni-directional
|
POS diversity dipoles for use with LMC radio cards with
two MMCX connectors-This antenna contains two standard 2.2dBi dipoles
and 59" of cable terminating in two MMCX connectors. It has a platform
with an adhesive backing to raise the antennas above obstructions.
|
2.2dBi
|
|
|
Omni-directional
|
Single dipole antenna with an RP-TNC connector. The
antenna provides indoor omnidirectional coverage
and is designed for use in the 2400-2500 MHz frequency band. It has a
90-foot articulation radius. It is can be used with all radios that utilize
an RP-TNC antenna connector.
|
2.2dBi
|
|
|
Omni-directional
|
Ceiling-mount indoor antenna with RP-TNC connector-This
antenna was designed for WLAN applications with frequencies of 2400-2500
MHz. The antenna is omni directional and has a nominal gain of 5.2dBi. It
comes with a clip that allows it to be mounted to a drop-ceiling cross
member.
|
5.2dBi
|
|
|
Omni-directional
|
Mast-mount indoor/outdoor antenna with a RP-TNC
connector-This antenna was designed for WLAN applications for frequencies of
2400-2500 MHz. The antenna is omnidirectional and
has a nominal gain of 5.2dBi. It is designed to be mounted on a round mast.
|
5.2dBi
|
|
|
Diversity Omni-directional
|
Pillar-mount diversity, indoor antenna with two RP-TNC
connectors-Cosmetic antenna is ideal for the
retail or hospital environment. Includes 36 in. of white RG-58 cable with a
separation of coaxial cables that are joined together to form a 10 in.
length. Has a tan cloth covering in a 12 x 5 rectangle. Included are two
mounting brackets that will keep the antenna 6 in. off the wall.
|
5.2dBi
|
|
|
Omni-directional
|
Mast mount outdoor high gain antenna with a RP-TNC
connector-This antenna was designed for WLAN applications for frequencies of
2400-2500 MHz. The antenna is omni directional and has a nominal gain of
12dBi. This design uses an elevated center-feed to produce an elevation
pattern with very little "squint" or beam-tilt. It is designed to
be mounted on a round mast.
|
12dBi
|
|
|
Patch
|
Wall mount, indoor/outdoor directional patch antenna.
Designed for use with any radio that features an RP-TNC antenna connector.
For use in the 2400-2500 MHz frequency band. The pigtail cable is 30"
long.
|
6dBi
|
|
|
Diversity Patch
|
Wall-mount indoor/outdoor antenna with
two RP-TNC connectors-Similar to the above patch, but providing diversity
antennas in the same package for areas where multipath
problems exist.
|
6dBi
|
|
|
Patch
|
Wall-mount indoor antenna with a RP-TNC connector-Designed
for use with any radio that features a RP-TNC connector. For use in the
2400-2500 MHz frequency band. The pigtail cable is 36" long.
|
8.5dBi
|
|
|
Yagi
|
High-gain outdoor directional antenna with a RP-TNC
connector-This WLAN antenna is a completely enclosed yagi.
It is designed to be used as a bridge antenna between two networks or for
point-to-point communications. It has a nominal VSWR of 1.5:1 and is less
than 2:1 over the entire frequency band. The gain is 10dBi and the half-power
beamwidth is 55 degrees. This antenna is normally
mounted on a mast and is vertically polarized.
|
10dBi
|
|
|
Yagi
|
High-gain outdoor directional antenna with a RP-TNC
connector-This WLAN antenna is a completely enclosed 16-element yagi. It is designed to be used as a bridge antenna
between two networks or for point-to-point communications. It has a nominal
VSWR of 1.5:1 and is less than 2:1 over the entire frequency band. The
gain is 13.5dBi and the half-power beamwidth is 30
degrees. This antenna is normally mounted on a mast and is vertically
polarized.
|
13.5dBi
|
|
|
Sector
|
Mast mount outdoor sector antenna with a RP-TNC
connector-This antenna was designed for WLAN applications for frequencies of
2400-2500 MHz. The antenna is directional and has a nominal gain of 14dBi.
Its flexible mounting bracket allows for either mast or wall mounting
options.
|
14dBi
|
|
|
Dish
|
Very high-gain outdoor antenna with a RP-TNC
connector-This WLAN antenna is a parabolic dish designed to be used as a
bridge antenna between two networks or for point-to-point communications. It
consists of an aluminum parabolic reflector and feed antenna. The antenna
features a rugged mount. It also offers 20 degree fine adjustment for both
horizontal and vertical planes. The antenna is provided with hardware for
mast mounting.
|
21dBi
|
|
Antenna
|
Type
|
Description
|
Gain
|
|
|
Omni/Patch
|
This articulating antenna is a dual function, diversity
omni or patch antenna. It is permanently attached to the RM-21A 5 GHz Cardbus radio module used with the 1200 Series access
point and operates between 5150-5825 MHz. When folded flat to the AP housing,
it is in a 9dBi patch mode, and when moved to any other position, it switches
to a 5dBi omni mode. In both cases it provides diversity antenna performance.
|
5dBi/9dBi
|
|
|
Omni-directional
|
Indoor-only dipole like omnidirectional
antenna for 5 GHz. Used with the 802.11a radio (AIR-RM22A) and the 1200
Series access point.
|
3.5dBi
|
|
|
Diversity Omni-directional
|
Indoor-only diversity omnidirectional
5 GHz antenna for use with the 1200 Series and the 802.11a module
(AIR-RM22A).
|
4.5dBi
|
|
|
Omni-
directional
|
Indoor or outdoor use omnidirectional
5 GHz antenna for use with the 1200 Series and the 802.11a module
(AIR-RM22A). Can be mast or ceiling mounted.
|
6dBi
|
|
|
Diversity Patch
|
Wall Mount diversity patch antenna with RP-TNC
Connectors-Designed for use in both indoor and outdoor applications. It comes
with wall mount hardware, and has a gain of 7 dBi.
It has a plenum rated pigtail cable of 36".
|
7 dBi
|
|
|
Patch
|
Wall or Mast Mount patch antenna-Designed for use indoor
or outdoors, this antenna comes with both wall mount and articulating mast
mount hardware. It has a plenum rated pigtail cable of 36".
|
9.5 dBi
|
|
|
Omni-directional
|
An omnidirectional antenna, for use with the Cisco Aironet 1400 Series
Wireless Bridge.
This non-diversity, vertically polarized antenna operates in the UNII-3 band
(5725 to 5825 MHz). The antenna is designed to be mast mounted in an outdoor
environment. The antenna is not compatible with other Cisco Aironet radio products operating in the 5 GHz frequency
band.
|
9dBi
|
|
|
Sector
|
A sector
antenna for use with the Cisco Aironet 1400 Series Wireless Bridge.
This non-diversity symmetric antenna operates in the UNII-3 band
(5725-5825 MHz). The antenna is designed to be mounted outdoors on a
mast or a suitable vertical surface. The antenna is not compatible with other
Cisco Aironet radio products operating in the 5 GHz
frequency band.
|
9.5dBi
|
|
|
Dish
|
A
parabolic dish antenna for use with the Cisco Aironet
1400 Series Wireless Bridge.
This non-diversity parabolic antenna operates in the UNII-3 band (5725-5825
MHz). The antenna is designed to be mounted outdoors on a mast.
The antenna is designed to be used at the hub or client site of a
point-to-point installation, or point-to-multipoint client sites, providing
extended range. The antenna is not compatible with other Cisco Aironet radio products operating in the 5 GHz
frequency band.
|
28dBi
|
|
|
Omni
|
A 7.5 dBi antenna which supports 4.9-5.8 GHz. It has a 12"
pigtail cable and an N Type connector.
|
7.5 dBi
|
|
|
Omni
|
A 5.5 dBi antenna which utilizes an N Type Connector. This
antenna directly mounts onto the unit, and has no cable attachments.
|
5.5 dBi
|
